3MFinish Line Knifeless Tape KTS-FL2, Trial Size, Green, 3.5 mm x 10 m

This works great on vinyl. Able to easily cut and removed. Works very well and easy to use. It sticks well where applied. If you wrap with vinyl, this is a must have. Worth the money spent on it.

This product always delivers. Rating this because it’s the best. If I could make the perfect product though, I’d make the cutting tape just a tad stickier and easier to remove the sub film without doing 2 swipes!

Man this stuff is genius. 10/10

easy to use, no mess. but I have yet to use it on a quality Cast vinyl wrap. Be aware of Cheap wraps. I used this great tape on vinyl wrap but with poor results i found out the wrap I used was not high grade cast vinyl, but instead some sort of cheap plastic (vivvid vinyl wrap) when i used it it made the wrap ripple instead of clean straight cut.

Gets the job done! Nothing wrong with it as long as you use it correctly.

it is very good tape

Cool way to get a clean cut with vinyl. Instructions are great and neither is the website they recommend, but there’s lots of videos out there to help.

I made three unsuccessful attempts to do a chrome delete on my 2019 Honda Civic Hatchback, all three ending in much profanity because chrome ended up being exposed when I trimmed the vinyl too much by accident with a knife.Enter this knife-less tape which allowed me to meticulously plan where the cuts would be to make the 'overhang' the perfect amount to be tucked under the weather stripping, place the tape down, then cut it after the vinyl was on. It really saved the project as I was ready to call it quits!Pro tip - if you have a surface to which this tape has a hard time sticking, lay down some blue painters tape first and this will stick on top - not as well as it does to a window or other surfaces of the car but well enough to allow me to set up cut lines on weather stripping around the chrome portions I was 'deleting'.It was really satisfying to pull the line up and see is slice through the vinyl. Just be sure that if the sliced edges will be visible, REALLY press the vinyl down on top until you can see every detail of the tape and center line embossed before you pull the line. It didn't matter for my uses since I was tucking everything underneath but 3M also makes a 'Design Line' tape that is finer and allows more complex curves in the tape. This 'Finish Line' tape is best for straight cuts with semi-rough edges that won't be seen.Photo of the finished driver's side of the car.